Spooky 2 Rife machine

Have been looking into the area of Rife & Radionics for years. This machine looks very good, is very reasonably priced & the software is free. (need Win 7/XP to run drivers).

A lot of stuff on-line - you tube & other places for info on the machine.

Spooky2 Home

Spooky2 generator_Signal generator_All Product_CLEN--Your best Clean Energy Solution Provider -

Brief overview of energetics -

Energy Medicine

Apotheosis, Thanks for sharing.

Thanks Blue. i have a Spooky2 system on order - am looking forward to having a play around with it.

Arrived this afternoon - have set it all up & am running some programs. Well pleased with it all.

Above is the picture of the set up -

Spooky2–XM frequency generator – for all Rife applications, 5M model
Spooky Remote
Spooky Boost cable

i've worked out the software & continuing experiments. Will see what the results are.

Also built a Radionics machine the other week - here are pics -

For anyone interested -

If you have the same exact amplitude, phase and frequency on each out then nothing is sent. So choose a different waveform on each outs or use inverse and sync.

i'm using inverse & sync (Advanced settings) - that lights both LED's on the remote.

"Spooky Boost produces the difference between the 2 generator outputs. Earlier versions of Spooky2 produced an output signal even if the frequencies of the 2 outputs were the same. Because of USB instruction delay, the waveforms were out of phase. Spooky2 now synchronizes the 2 outputs. If the signals are identical in amplitude, phase and frequency, then there is no difference between them, and no output will be produced. Spooky Boost usually uses "Inverse + Sync" to maximize output power. Inverting OUT2 will provide the greatest difference between the generator outputs. Doubling the voltage quadruples the power. P = V^2 / R where P = power, V = voltage and R = resistance. R is constant, so the power is proportional to the square of the voltage."

Current settings -

Duty Cycle 50%
Amplitude 20V
.o5% Feathering
Skip Concurrent Duplicate Frequencies
Remove Duplicate Frequencies

Sort Frequencies Ascending

F2 = F1 X 11Hz | 0 Percent
Modulate F2 using F1 (AM DSB)

i've run a set of Frequencies for past few days.

Have used square wave X1 (now running with X10) & also -
Damped Sinusoidal X11
Have also tried Sine Wave X1

(don't know how much difference it makes changing the X value & spike length/ratio on the wave forms?)

Inverse & Sync on out 2.

Corrections to settings, after new info -

Changed "Sort Frequencies Ascending" to "Do Not Sort." Some sets are designed to knock out pathogen components in a certain order. When you change that, the set may not work correctly.

There's no benefit to entering any value other than 1 for "X" on your square wave. Inadvisable to change the "X" values for any of the damped or H-Bomb waves unless you know exactly what you're doing. These values are what construct the waves internally. Spike values are fine to change though.

With individual wobbles for frequency and amplitude, have set the Apply menu to "Frequencies Directly" because it's wobbling an already feathered signal.

Seems that's it for current Frequency Programs.

XM machine will run on Win 8 as well.

Interesting Spooky2 & radionics set up -



Radionics Machine - Wickenden Device V.02 | Berkana Path Radionics

Well, have been experimenting with this system for past few days. It hasn't yet made any discernible difference to a physical problem i have. i'll carry on with it all.

Apotheosis, I'm sorry to hear you are not feeling better.

It's OK. i should really go for an operation, i have kept putting it off & trying to resolve things myself.

Software interface for Spooky2 -

After a lot of experimentation & running the sweep (with 2 remotes) Am now running - on remote & boost cable - 12 program cycles with the settings -

Out 1 Square Wave - Out 2 Inverse & Sync. F2 + F1 X 11 | Hz 0. Modulate F2 using F1 (AM DSB). Amplitude 20. Amplitude & Frequency wobble - Triangle - 1% - 16 Steps. All other settings are default.

Does appear to be helping a bit.

What's the latest on this, Apotheosis? Seeing any progress? What's your opinion so far?

(And thanks for posting so much information. It's really appreciated.)

Thanks.

Am not sure? It does appear to be helping a bit.

Found this which is an interesting site as well - http://www.electroherbalism.com/Bioe...dAnecdotes.htm

I'd really appreciate it if you could keep this thread updated occasionally, or at least send me a private message now and then about your progress/experience. I've been thinking about experimenting with this for a little while now, but my budget won't permit any investment for a few more months.

Sure. i monitor this forum for any updated threads, so remind me if i forget. Don't see what harm this device can do? & maybe there is something in it. The condition i'm using it on has slightly improved, & overall i have been feeling better recently, but that may or may not be a result of the machine? - will keep you updated.

There is a Spooky2 forum - with a lot of discussion & info -

The Spooky2 Forum ? Portal

Hey thanks....somehow I missed that one when I was searching. I owe you one

Glad to be of service.

It does appear to have improved things a lot, after a long time of running. Have been feeling very tired - am now running the Frequency Fatigue Program - 10.55 & 7.83



Previous program set was -

Abdominal Inflammation (CAFL)
Abscesses 3 (XTRA)
Abscesses (XTRA)
Detox 4 Toxins throughout the body (CAFL)
Candida & Organ Support 1 (XTRA)
Inflammation 1 (XTRA)
Inflammation 2 (XTRA)
Inflammation General (CAFL)
Inflammation General (XTRA)
Bacterial Infections (CAFL)
Wide spectrum antibiotic 4 (CUST)
Inflammation (CUST)

Ran for just over 2 weeks 24/7

Seems to be a good idea to run the Detox & Candida & Organ Support programs, along with programs for the specific treatment. The Spooky 101 guide suggests running extensive Detox programs before any treatment of major condition.